- #Apc network management device ip configuration wizard download install
- #Apc network management device ip configuration wizard download serial
- #Apc network management device ip configuration wizard download software
- #Apc network management device ip configuration wizard download code
If using DHCP, a vendor cookie (DHCP Option 43) is required by default. In regards to Network Management Card 1 (AP9617, AP9618, AP9619) or devices with an embedded Network Management Card 1 (such as a AP78XX or AP79XX Rack PDU, Environmental Monitoring Unit, etc), there are three available options to configure the Network Management Card (NMC) with it's initial settings: the Wizard, terminal emulation (local/direct connection), and Address Resolution Protocol (ARP).ĭefault boot mode: DHCP/BootP - With DHCP Option 43 Vendor Cookie required to accept DHCP Offer.īy default, all of APC's Network Management Card 1 based devices are configured for a boot mode of DHCP/BOOTP.
![apc network management device ip configuration wizard download apc network management device ip configuration wizard download](https://entrancementbe.weebly.com/uploads/1/2/3/9/123915500/558689842.png)
#Apc network management device ip configuration wizard download code
I would be happy to advise you on the correct cable for your Smart-UPS if you would please provide me with the exact model number of the Smart-UPS off the white bar code sticker on the back of the unit.
#Apc network management device ip configuration wizard download software
PowerChute Network Shutdown is the shutdown software you would use on a server that is plugged into the UPS with the Network Management Card. PowerChute Network Shutdown is available for download by selecting Software Upgrades - PowerChute Network Shutdown under Filter by Software/Firmware at the link below:Īlternatively, if you prefer to use PowerChute Business Edition software, you would need to remove the network management card from the UPS and connect the proper cable to the UPS. You would need to assign a valid IP address, subnet mask and default gateway to the network management card as described in the FAQ dbeato linked above. You would then be able to access the web interface of the card to view its status. The shutdown software that is used with the Network Management Cards is PowerChute Network Shutdown.
![apc network management device ip configuration wizard download apc network management device ip configuration wizard download](https://d7rh5s3nxmpy4.cloudfront.net/CMP1313/1/FM2605BI2511_698DA000001_SZ1.jpg)
#Apc network management device ip configuration wizard download serial
PowerChute Business Edition requires a USB or serial connection between the server running PowerChute Business Edition and the UPS. Unfortunately, PowerChute Business Edition does not work with the network management cards.
#Apc network management device ip configuration wizard download install
I am sorry for the trouble you experienced trying to install PowerChute Business Edition.